ソリューション ファインダー

アプリケーション ノート

Showing 1 - 20 of 26 Application Notes
概要
AN-95 InnoSwitch3-PD Design Guide

This application note is intended to assist in designing an isolated AC-DC flyback power supply or charger using the InnoSwitch3-PD device. It provides guidelines for selecting key components and the information necessary to complete a suitable transformer design.

AN-92 MinE-CAP Design Guide

This application note is intended as a design guide for engineers designing an isolated AC-DC single-stage flyback power supply using the MinE-CAP family of devices. It is assumed that the designer is using the MinE-CAP together with the InnoSwitch3 family of power conversion ICs. However, the design equations shown can be used for applications beyond the scope of this document.

AN-86 - LinkSwitch-XT2 Design Guide

This application note (AN) provides guidance for using LinkSwitch-XT2 and should be read in conjunction with and in the context of the LinkSwitch-XT2 family data sheet.

AN-90 TinySwitch-III Family Design Guide

This application note (AN) provides guidance for using TinySwitch-III and should be read in conjunction with and in the context of the TinySwitch-III family data sheet.

AN-88 TinySwitch-LT Family Design Guide

This application note (AN) provides guidance for using TinySwitch-LT and should be read in conjunction with and in the context of the TinySwitch-LT family data sheet.

AN-89 - InnoMux Chipset - Tips, Techniques and Troubleshooting Guide

This application note (AN) provides guidance for using InnoMux chipset and should be read in conjunction with and in the context of the InnoSwitch3-MX and InnoMux family data sheets.

AN-84 - InnoSwitch3-Pro Toggle Board (TST-047) User's Guide

Provides guidance to developers on how to use an evaluation board (TST-047) to test and debug InnoSwitch3-Pro based power supplies.

AN-85 - InnoSwitch3-Pro Master Debugger User’s Guide

This application note describes the use of a tool made using an Arduino-UNO and an LCD Display shield which enabled evaluation of the power stage made using InnoSwitch3-Pro.

AN-79 - Wave Soldering Guidelines for InSOP and HSOP Packages

These guidelines apply to InSOP packages without bottom exposed pads (such as InSOP-24D). InSOP packages with bottom exposed pads (such as InSOP-24B, InSOP-24C) must be board mounted using IR/convection reflow.

AN-72 - InnoSwitch3 Family Design Guide

InnoSwitch3 devices combine a high-voltage power MOSFET / PowiGaN switch, with both primary-side and secondary-side controllers, an innovative high-speed magneto-coupling communications technology and a synchronous rectification driver into one isolated, safety-rated device.

AN-77 - InnoSwitch3-Pro Code Library using Arduino

Download the code library: InnoSwitch3-Pro Code Library and API for Arduino

AN-78 - InnoSwitch3-Pro Code Library using PIC16F18325

Download the code library: InnoSwitch3-Pro Code Library and API for Microchip PIC16F18325

AN-74 - InnoSwitch3-Pro Programming Manual

Provides guidance to developers on how to program the InnoSwitch3-Pro product through its I2C interface.

AN-70 - LinkSwitch-TN2 ファミリー
AN-61 - LinkSwitch-3 ファミリー設計ガイド

LinkSwitch-3 ファミリー設計ガイド

AN-58 - LinkSwitch-HP Design Guide

High-Power Off-Line Switcher with Accurate Primary-Side Regulation

AN-303 - Qspeed Family RoHS Compliant Soldering Considerations

Qspeed Family RoHS Compliant Soldering Considerations

AN-302 - Qspeed Reverse Voltage Sharing of Series Rectifiers

Reverse Voltage Sharing of Series Rectifiers

AN-301 - Qspeed Reverse Recovery Charge, Current and Time

Reverse Recovery Charge, Current and Time

AN-300 - Qspeed High Temperature Reverse Bias (HTRB) Reliability Testing

Qspeed High Temperature Reverse Bias (HTRB) Reliability Testing